Fuel gauge broken
Forumsregeln
Um diesen Bereich so informativ wie möglich zu halten, löschen die Moderatoren des Forums bei Bedarf jegliche Beiträge die nicht direkt mit der Problemlösung zu tun haben. Diskussionen über Sinn und Unsinn und Geschmacksfragen können in den dafür vorgesehenen Kategorien abgehalten werden, und sind da auch erwünscht.
Um diesen Bereich so informativ wie möglich zu halten, löschen die Moderatoren des Forums bei Bedarf jegliche Beiträge die nicht direkt mit der Problemlösung zu tun haben. Diskussionen über Sinn und Unsinn und Geschmacksfragen können in den dafür vorgesehenen Kategorien abgehalten werden, und sind da auch erwünscht.
-
- Beiträge: 25
- Registriert: Dienstag 22. September 2009, 17:17
- Postleitzahl: 0
Fuel gauge broken
Hi there, the fuel gauge on my rekord is showing full all the time and im not sure what it could be any ideas thanks. Rich.
- gintonic
- Beiträge: 3052
- Registriert: Sonntag 4. Mai 2008, 19:41
- Postleitzahl: 82347
- Land: Deutschland
- Wohnort: Starnberger See bei München
Re: Fuel gauge broken
could be three reasons:
a) The gauge is broken
b) the electric wire to the signal sender has a ground negativ contact
c) the sender in petrol tank is broken
Most of the time the sender in petrol tank or electric contacts
are the reason for disfunktion...
Cheers
a) The gauge is broken
b) the electric wire to the signal sender has a ground negativ contact
c) the sender in petrol tank is broken
Most of the time the sender in petrol tank or electric contacts
are the reason for disfunktion...
Cheers
- Guido
- Beiträge: 90
- Registriert: Montag 5. Mai 2008, 22:49
- Postleitzahl: 33378
- Land: Deutschland
- Wohnort: Rheda-Wiedenbrück
Re: Fuel gauge broken
i had the problem that the contact inside the was stuck of rust. Remove it from the fuel tank and if so, grase it with WD-40. That is how i did it.
best,
Guido
best,
Guido
-
- Beiträge: 25
- Registriert: Dienstag 22. September 2009, 17:17
- Postleitzahl: 0
Re: Fuel gauge broken
Guido hat geschrieben:i had the problem that the contact inside the was stuck of rust. Remove it from the fuel tank and if so, grase it with WD-40. That is how i did it.
best,
Guido
Cheers Guido, i took the fuel sender out lastnight and it seemed fine, i put the wire to it and and touched ir on the fuel tank but no matter where i had the arm it just says full, think i'll have another look at the weekend. Cheers, Rich.
-
- Beiträge: 25
- Registriert: Dienstag 22. September 2009, 17:17
- Postleitzahl: 0
Re: Fuel gauge broken
gintonic hat geschrieben: b) the electric wire to the signal sender has a ground negativ contact
Ahh, what do you mean by "B"? should the sender unit have a negative earth from the fuel tank? what is the wire that clips on to the front? is that positive or negative?